Heat Cool and Insulate

Posts Tagged ‘home repair’

Air conditioners regularly fail at the worst possible times.  When it is intensely hot, you do not need your air conditioner to suddenly stop working.  But if it does, there are some simple steps you can take to fix the problem yourself.  Below is an inventory of the 4 most common air conditioning problems encountered, with some advice on how to fix them.  

1.  Check The Controller – If the controller has been incorrectly used, the air conditioner won’t function.  HVAC systems have different settings for cooling and heating, and your air conditioner won’t function if the wrong setting is used.  If you are still wrestling, try looking in your operation manual or ask the contractor who sold you the system for advice.  

2.  Clean The Filters – So many air conditioners struggle because the owners don’t clean the filters.  Cleaning the filter is continuing maintenance that you should be performing one or more times every few months.  Cleaning your air conditioners filters can regularly fix an issue immediately.  

3.  Inspect The Compressor – If your compressor fails your entire aircon system will fail.  Check round the compressor for any symptoms of damage or wear and tare.  Hear the compressor for any irregular noises.  Look around the compressor for ice build up as well .  If you notice any of these things, it may be a sign of a rather more serious problem and you must call in an air con contractor to inspect the system.  

4.  Reset The Power – Just like PCs, a straightforward reset can often fix a hvac system.  All you need to do is go to the meter box and turn the unit off.  If fitted, there might also be an isolator switch at the compressor you can also turn off.  Turn both these switches off for a minute or two before turning back on.  It is a straightforward thing to try but it works quite a lot of the time.  

If you have tried all of these points, hopefully you have has some success and your air conditioner is now working.  If not, it is time to call in the airconditioning contractor.

Tags: , insulating, Heating

Tags: insulating, Heating,

Radiant heat is also known as Infrared Radiation and works on the same principle as a microwave.  Unlike standard heating devices, where the air in the room is heated, glowing heating system warms the objects and people in the room.  Radiant heat is conveyed through locations in the floor, in wall panels or in the ceiling.  Here we’ll have a look at radiant floor heating systems.  

If you’ve ever tiptoed over a cold bathroom floor first thing on a dark, cold morning, you may appreciate the comfort offered by a glowing floor heating system.  The glowing floor heating system is placed either under a tiled floor, inserted in a concrete floor or attached to the underside of a wall to wall flooring mat.  

Sorts of glowing Floor Heating Systems :

There are 3 main sorts of glowing floor heating systems – an electrical glowing system that is composed of electric wires placed or embedded under the floor, a radiant air system that consists of hot air pipes under the floor and a hydronic glowing system, where there are hot water tubes beneath the floor.  

Many folk like to install hydronic radiant systems as these are comparatively low in cost than the other two radiant systems and require less electricity, which translates to lower electricity bills.  The hot water in a hydronic glowing system is pumped from a boiler – a conventional wood, coal, gas or oil powered boiler or a solar heater – and passes through polyethylene tubes placed under the room flooring.  With the help of a zoning valve and thermostat, you can control the hot water flow to get the exact needed room temperature.  

In a hot air glowing floor heating system, hot air is pumped through pipes laid under the flooring.  The hot air can come through a regular furnace or a solar heater.  Neither option is extremely practical in terms of cost and convenience.  Employing a solar heater, as an example, may work during the day time but is reasonably useless for the night-time.  Of course you can mix the solar heating with a traditional furnace for the night, but then you have to contend with the proven fact that air cannot sustain heat for a substantial period.  

electrical glowing floors, as discussed, have electric wires underneath.  These work fine but can hike up your electricity bill lots.  Putting the electric wires in a thick concrete floor can cut costs to a point as the concrete will trap and store the heat for several hours and you can turn off the heating system in this time.  A tiled floor is also a good conveyor of heat, but if you have a floor covering that can put a spanner in the works.  Floor coverings like a linoleum or a carpet cut the amount of heat rising from the floor, so either have a thin, light covering, if you must have it, or place it only in selected areas.  If you’ve a wooden floor, keep in mind the possibility of the wood cracking or distorting from the heat underneath.  It is mostly best to have a laminated wooden floor, which can resist the heat better, instead of a complete wood en one.

If you enjoyed this content about heating system, then go over and check out this curious internet site talking about Dallas Heating and Air Conditioning.

Tags: Cooling, insulating, Heating

Tags: Cooling, Heating, insulating