Simple Steps to Fix Your Air Conditioning Problems Yourself

There are times that you might experience problems with your residential air conditioning, and you don’t really know what you should do. However, there are some simple steps you can take before you call in an air conditioning repair service. With a small bit of effort, you might be able to avoid large repair bills. Here’s a troubleshooting guide to help you determine what’s wrong and what you can do to fix it.

Depending on what the issue is, there are different things to look for. If nothing is working at all, the problem might be the power source or your settings. First of all, you need to check that there is actually power being delivered to the unit. Find out where it’s connected and test the power source.

If that didn’t fix the problem, inspect the unit to make sure all the settings are correct. It’s amazing how these basic steps have saved many people from calling in an air conditioning repair contractor.

Sometimes your air conditioning unit is delivering air, but it’s not being cooled. If this is the case then there are a few things that could be the problem. The first thing you need to do is determine the amount of air being pushed through the unit. There could be an issue with the duct system or blower if the air flow is weak.

After that, inspect the blower unit to see what kind of shape it’s in. If it’s dirty the blower may be spinning but not moving much air. All you have to do is take it out, clean it, and put it back. You might be able to avoid spending a lot of money with just this basic move.

Something else that can cause problems with air flow is if your ducts and filters are dirty. Find the filter, remove it and replace it with a clean one. This is another easy thing that you can do on your own and costs very little.

If it all appears to be clean, take a look at the ducts to ensure that they are properly connected and clear of any debris. Shine a flashlight down. If the room outside the duct is dark you will see light coming through. But you should be able to see the separation easily if it’s an obvious leak.

Another common cause of a drop in cooling capacity is icing of the compressor. This is another thing you can easily take of yourself. Disconnect the power then let it warm up. The ice will melt right off. Before you turn the air conditioner back on, make sure that all of the ice is completely melted.